Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer & Antifoam Product Catalogue

64 product categories and 114 models across six defoamer types. Whether your team calls it a defoamer, an antifoam, a defoaming agent or a foam control agent, what decides performance is the chemistry and active content. Every model is listed with its full property table: appearance, active content, viscosity, pH, ionic type and, where relevant, density and flash point.

Type:

Silicone & Ether Defoamers

Our largest and most versatile type. Modified polydimethylsiloxane, silicone polyether, fluorosilicone and silicone-ether emulsions and concentrates, including high-content models that manufacturers dilute themselves and powder grades for dry-mix systems.

See the full Silicone & Ether range and selection guide

223 / AC100 High-Content Silicone Defoamer Concentrate: white viscous emulsionSilicone & Ether

223 / AC100 High-Content Silicone Defoamer Concentrate

223AC100

A high-content silicone concentrate. It does the work of a standard defoamer at a fraction of the dose, and it dilutes cleanly for manufacturers who would rather cut their own batches.

Silicone concentrate (dilutable)View specifications
218B / 218PF Silicone Polymer Emulsion Defoamer: white emulsionSilicone & Ether

218B / 218PF Silicone Polymer Emulsion Defoamer

218B218PF

A silicone-polymer emulsion defoamer that holds up in salt, heat and shear. It leaves no oil ring, no sediment and no haze, and it will not cloud the fluid it is dosed into.

Silicone polymer emulsionView specifications
AC30 / AC50 Silicone-Polyether Broad-Spectrum Emulsion Defoamer: white emulsionSilicone & Ether

AC30 / AC50 Silicone-Polyether Broad-Spectrum Emulsion Defoamer

AC30AC50

An economical broad-spectrum defoamer for water-based systems, built for room-temperature work. It breaks foam fast, disperses well and stays stable after you dilute it.

Silicone-polyether emulsionView specifications
30801 High-Content Silicone-Polyether Emulsion Defoamer: white emulsionSilicone & Ether

30801 High-Content Silicone-Polyether Emulsion Defoamer

30801

A modified polydimethylsiloxane emulsion at 33% active content. It breaks foam fast and disperses well, and it does not throw an oil ring after dilution. A dependable low-temperature workhorse.

Silicone-polyether emulsionView specifications
2544 / 2565 Silicone-Polyether Emulsion Defoamer: white emulsionSilicone & Ether

2544 / 2565 Silicone-Polyether Emulsion Defoamer

25442565

A broad-spectrum room-temperature emulsion defoamer with strong foam inhibition and good dispersion. It keeps working after dilution, at an economical price.

Silicone-polyether emulsionView specifications
ND120F / 120Z High-Temperature Silicone Emulsion Defoamer: white emulsionSilicone & Ether

ND120F / 120Z High-Temperature Silicone Emulsion Defoamer

ND120F120Z

A high-temperature silicone emulsion defoamer rated to 130 °C. It is a drop-in alternative to imported high-temperature grades in jet dyeing, impregnation padding and other hot, high-shear processes.

Silicone emulsionView specifications
118G / 208G / 418G High-Efficiency Silicone Powder Defoamer: white powderSilicone & Ether

118G / 208G / 418G High-Efficiency Silicone Powder Defoamer

118G208G418G

A silicone powder defoamer for dry-mix systems. The active rides on a solid carrier, so it survives high electrolyte, strong acid, strong alkali and high shear, where ordinary silicone emulsions give up.

Solid powderView specifications
618G / 2803AG High-Efficiency Silicone-Free Powder Defoamer: white powderSilicone & Ether

618G / 2803AG High-Efficiency Silicone-Free Powder Defoamer

618G2803AG

A silicone-free powder defoamer built on modified polyoxyethylene ethers. It is formulated for cationic starch production and other powder systems that rule out silicone.

Solid powder (silicone-free)View specifications
F681 / 2918N Defoamer for Polycarboxylate Admixtures: white emulsionSilicone & Ether

F681 / 2918N Defoamer for Polycarboxylate Admixtures

F6812918N

A defoamer built specifically for the concrete admixture industry. It knocks down harmful macro- and micro-foam while leaving the beneficial bubbles from air-entraining agents intact.

Emulsion (water- and oil-soluble grades)View specifications
P2011 Fluorinated Silicone Emulsion Defoamer: white emulsionSilicone & Ether

P2011 Fluorinated Silicone Emulsion Defoamer

P2011

A fluorosilicone emulsion defoamer with strong acid and alkali durability and good dispersibility in hard water. It works at low dosage, inhibits foam for long stretches and carries a fine particle size.

Fluorosilicone emulsionView specifications
2545 / 1210 Silicone-Polyether Broad-Spectrum Emulsion Defoamer: white emulsionSilicone & Ether

2545 / 1210 Silicone-Polyether Broad-Spectrum Emulsion Defoamer

25451210

A cost-effective broad-spectrum room-temperature silicone-polyether emulsion. Two active levels let you match the dose to the foam load without switching grade.

Silicone-polyether emulsionView specifications
CP-02 / CP-04 Silane High-Efficiency Defoamer: white emulsionSilicone & Ether

CP-02 / CP-04 Silane High-Efficiency Defoamer

CP-02CP-04

A multifunctional siloxane-silicate defoamer with good water solubility, a stable emulsion, strong alkali resistance and a low dose. It breaks foam and inhibits it in one product.

EmulsionView specifications
9059 / D-150 Solvent-Based Defoamer: yellow cloudy liquidSilicone & Ether

9059 / D-150 Solvent-Based Defoamer

9059D-150

A solvent-based defoamer built from imported raw materials, with 9059 supplied at 100% active. It breaks foam fast, holds up under high shear and dilutes easily in water with no oil ring.

Solvent concentrate / solvent-basedView specifications
GP14 / GP14Y Composite Defoamer for Cutting Fluids: cloudy oily liquidSilicone & Ether

GP14 / GP14Y Composite Defoamer for Cutting Fluids

GP14GP14Y

A fluorosilicone composite defoamer for metalworking fluids. Below 0.1% it keeps foam suppressed for up to 100 hours, and it self-emulsifies in water on its own.

Composite concentrateView specifications
DM07 / DM08 / DM100 Silicone-Grease Defoamer for Cutting Fluids: white emulsionSilicone & Ether

DM07 / DM08 / DM100 Silicone-Grease Defoamer for Cutting Fluids

DM07DM08DM100

A silicone-grease system purpose-built for metal cutting fluids. It balances foam break against inhibition, holds up through dilution and shear, and works at a small dose without upsetting the finished fluid.

Emulsion and concentrateView specifications
BS101 Silicone-Polyether Defoamer Concentrate: white emulsionSilicone & Ether

BS101 Silicone-Polyether Defoamer Concentrate

BS101

A high-content silicone concentrate for aqueous systems in the pH 7–14 range. It breaks foam fast, disperses well in water, holds inhibition and stays stable under high shear.

Silicone concentrateView specifications
4807 Composite Polyether Defoamer: cloudy oily liquidSilicone & Ether

4807 Composite Polyether Defoamer

4807

A propoxylated polyoxyethylene ether base blended with modified fluorosilicone and a hydrophilic silicone polyether. It works in water-based and oil-based systems alike.

Compound concentrateView specifications
56-1 / 56-2 Silicone Defoamer Concentrate: white viscous emulsionSilicone & Ether

56-1 / 56-2 Silicone Defoamer Concentrate

56-156-2

A high-content silicone concentrate that does standard defoamer work at a fraction of the dose. It stays stable through dilution below 80 °C.

Silicone concentrate (dilutable)View specifications
62B / 62F High-Temperature Silicone Emulsion Defoamer: white emulsionSilicone & Ether

62B / 62F High-Temperature Silicone Emulsion Defoamer

62B62F

A high-temperature silicone emulsion defoamer built to replace the imported grades. It dissolves well in the water phase and leaves no sediment or floating oil.

Silicone emulsionView specifications
9262-1 / 9262-2 High-Temperature Self-Emulsifying Defoamer: white emulsionSilicone & Ether

9262-1 / 9262-2 High-Temperature Self-Emulsifying Defoamer

9262-19262-2

Built with major oilfields for high-temperature, high-salinity production. Grafted silicone polyethers and specially modified polysiloxanes knock down foam from extraction, filtration and gathering fast.

Self-emulsifying emulsionView specifications
5724 / 2918 Acid- and Alkali-Resistant Silicone Ether Defoamer: white emulsionSilicone & Ether

5724 / 2918 Acid- and Alkali-Resistant Silicone Ether Defoamer

57242918

A modified silicone ether emulsion that stands up to acid and alkali. A small dose breaks foam hard and keeps it down, and the emulsion itself stays intact with no creaming and no oil ring.

Modified silicone ether emulsionView specifications
P2011Y / P62A High-Efficiency Fluorosilicone Emulsion Defoamer: white emulsionSilicone & Ether

P2011Y / P62A High-Efficiency Fluorosilicone Emulsion Defoamer

P2011YP62A

A fluorosilicone compound made for water-based cutting fluids and water-based lubricants. Below 0.1% it keeps foam suppressed for up to 100 hours.

Fluorosilicone emulsionView specifications
663-10 / 663-20 / 6557 High-Content Silicone-Polyether Defoamer: white emulsionSilicone & Ether

663-10 / 663-20 / 6557 High-Content Silicone-Polyether Defoamer

663-10663-206557

An emulsion defoamer built from modified polysiloxane and high-carbon polyether. It is at its strongest in pulp making, black liquor washing and landfill leachate.

Silicone-polyether emulsionView specifications
3020 / 3020A Fatty Alcohol-Silicone Emulsion Defoamer: white emulsionSilicone & Ether

3020 / 3020A Fatty Alcohol-Silicone Emulsion Defoamer

30203020A

A fatty alcohol-silicone emulsion defoamer that resists strong alkali, heat and shear. It stays stable with no gel formation and improves filter drainage on black liquor.

Fatty alcohol-silicone emulsionView specifications
ST-50 / 861 High-Content Silicone Defoamer Concentrate: white emulsionSilicone & Ether

ST-50 / 861 High-Content Silicone Defoamer Concentrate

ST-50861

A high-content silicone concentrate for aqueous systems in the pH 7–14 range. Two active grades, 50% and 35%, let you trade cost against performance.

Silicone concentrate (dilutable)View specifications
639 / TZ30 High-Content Silicone Defoamer Concentrate: white emulsionSilicone & Ether

639 / TZ30 High-Content Silicone Defoamer Concentrate

639TZ30

A high-content silicone concentrate for aqueous systems in the pH 7–14 range. The 48% grade is for maximum performance, the 25% for economy.

Silicone concentrate (dilutable)View specifications

Silicone-Free Emulsion Defoamers

Completely silicone-free fatty-alcohol-ether and polyether emulsions for processes where silicone spotting, residue or contamination is a no-go: low-pH paper sizing white water, engineered stone, food and fermentation applications.

See the full Silicone-Free range and selection guide

Mineral Oil & Polyether Ester Defoamers

Mineral oil, fatty-acid-ester and polyether-ester systems for coatings, inks, adhesives and emulsion polymerisation. Acid and alkali resistant, and formulated not to produce surface defects or impair film formation.

See the full Mineral Oil / PE Ester range and selection guide

1308 / 1309 Mineral Oil Defoamer: yellow oily liquidMineral Oil / PE Ester

1308 / 1309 Mineral Oil Defoamer

13081309

A mineral-oil defoamer whose actives are a specialty polyether and silica. It breaks foam fast and holds inhibition for hours across water-based systems.

Mineral oil concentrateView specifications
202 / 7501 Long-Lasting Defoamer for Coatings: pale yellow cloudy viscous liquidMineral Oil / PE Ester

202 / 7501 Long-Lasting Defoamer for Coatings

2027501

The 202 grade pairs polyether ester with mineral oil and hydrophobic silica; 7501 is the waterborne version, built around a dispersing solvent. Neither one leaves surface defects or interferes with film formation.

Compound concentrateView specifications
70104B Broad-Spectrum Polyether Fatty-Acid-Ester Defoamer: pale yellow transparent liquid at ambient temperature; a small amount of sediment forms below 5 °cMineral Oil / PE Ester

70104B Broad-Spectrum Polyether Fatty-Acid-Ester Defoamer

70104B

A broad-spectrum polyether fatty-acid-ester defoamer that breaks or suppresses foam in aqueous systems. It is at its best in water-soluble polymer formulations and medium-to-high viscosity systems.

Polyether fatty-acid esterView specifications
530-4 Mineral Oil Defoamer: yellow oily liquidMineral Oil / PE Ester

530-4 Mineral Oil Defoamer

530-4

A mineral-oil defoamer built on mineral oil, vegetable oil, a fatty acid amide and a dispersant. It gives broad compatibility and long-lasting inhibition in coating systems.

Mineral oil concentrateView specifications
4416 / 2308 Silicone-Free Mineral Oil Defoamer: pale yellow cloudy liquidMineral Oil / PE Ester

4416 / 2308 Silicone-Free Mineral Oil Defoamer

44162308ink-grade

The 4416 grade is mineral oil with hydrophobic silica and a dispersant; 2308 is mineral spirits with isoparaffinic oil and a modified polyether. Both resist acid and alkali and help entrained air out of viscous media.

Compound concentrateView specifications
224 / 224P High-Fatty-Acid-Ester Emulsion Defoamer: white emulsionMineral Oil / PE Ester

224 / 224P High-Fatty-Acid-Ester Emulsion Defoamer

224224P

A high-fatty-acid-ester emulsion defoamer for foaming systems that ordinary silicone defoamers do not handle. It breaks foam fast, disperses easily and mixes readily with water.

Fatty acid ester emulsionView specifications
A-Ester Polyether Ester Defoamer: pale yellow oily liquidMineral Oil / PE Ester

A-Ester Polyether Ester Defoamer

A-Ester

A waterborne defoamer made by esterifying polyether with a fatty acid. It has broad compatibility, keeps foam down for a long time and leaves film formation and surface quality untouched.

Polyether esterView specifications
5010 / 5012 Polyether Ester Defoamer: yellow oily liquidMineral Oil / PE Ester

5010 / 5012 Polyether Ester Defoamer

50105012

A waterborne defoamer built from polyether ester, a dispersing solvent and hydrophobic silica. It leaves no surface defects and does not interfere with film formation.

Polyether ester concentrateView specifications
YL20 / YL30 / YL50 Polyether Ester Defoamer: pale yellow oily liquidMineral Oil / PE Ester

YL20 / YL30 / YL50 Polyether Ester Defoamer

YL20YL30YL50

A waterborne defoamer made by esterifying polyether with a fatty acid, offered in three viscosity grades. It has broad compatibility and keeps foam down long, with no film defects.

Polyether esterView specifications
PT24 High-Fatty-Acid-Ester Emulsion Defoamer: white emulsionMineral Oil / PE Ester

PT24 High-Fatty-Acid-Ester Emulsion Defoamer

PT24

A high-fatty-acid-ester emulsion defoamer for systems where ordinary silicone is the wrong choice. It leaves no oil ring and does not block membranes, and it breaks foam fast.

Fatty acid ester emulsion (50% solids)View specifications

Polyether Defoamers

Block and random polyether copolymers that are non-toxic, produce no spotting, have low hygroscopicity and excellent chemical stability. The default choice wherever silicone chemistry is not permitted, including fermentation and power plant FGD.

See the full Polyether range and selection guide

201 Polyether Defoamer: colourless to pale yellow oily liquidPolyether

201 Polyether Defoamer

201

A multifunctional polyether for processes that rule out silicone. It handles foam without leaving spots, picks up little moisture and stands up to aggressive chemistry.

PolyetherView specifications
325-2 Polyether Defoamer: transparent to slightly cloudy oily liquidPolyether

325-2 Polyether Defoamer

325-2

A non-toxic polyether concentrate. It controls foam without leaving spots and picks up little moisture, and it stays stable where silicone defoamers cannot go.

Polyether concentrateView specifications
1101-2 / 1817 Polyether Ester Defoamer for Polycarboxylate Admixtures: cloudy oily liquidPolyether

1101-2 / 1817 Polyether Ester Defoamer for Polycarboxylate Admixtures

1101-21817

A silicone-free, high-carbon polyether ester built for concrete admixtures, above all polycarboxylate water reducers. It takes out the harmful foam and leaves the air-entrainer bubbles alone.

Polyether ester (silicone-free)View specifications
2020T Polyether Defoamer for Industrial Cleaning: colourless to pale yellow liquidPolyether

2020T Polyether Defoamer for Industrial Cleaning

2020T

A multifunctional polyether aimed at industrial cleaning. It clears the silicone-spot residue that silicone defoamers leave behind, and it blends into the bath without trouble.

PolyetherView specifications
Y02E Polyether Defoamer: colourless transparent oily liquidPolyether

Y02E Polyether Defoamer

Y02E

An end-capped block copolymer of propylene oxide and ethylene oxide built on a propylene glycol starter, molecular weight 2000. Non-toxic, leaves no spots and picks up little moisture.

Polyether (MW 2000)View specifications
3014 / SX3000 Polyether Defoamer for Fermentation: transparent to pale yellow viscous liquid (polyether type)Polyether

3014 / SX3000 Polyether Defoamer for Fermentation

3014SX3000

A strong polyether made by catalysed block polymerisation of propylene oxide and ethylene oxide. Non-toxic, leaves no spots, and it does not disturb the culture strains in the fermenter.

PolyetherView specifications
2030 / 2080 Polyether Defoamer for Power Plant FGD: transparent to slightly cloudy liquidPolyether

2030 / 2080 Polyether Defoamer for Power Plant FGD

20302080

A polyether built specifically for foam in power plant flue-gas desulphurisation. Non-toxic, leaves no spots, holds its chemistry in service and does not disturb the culture.

PolyetherView specifications
2803 / 4809C Polyether Defoamer: transparent oily liquidPolyether

2803 / 4809C Polyether Defoamer

28034809C

A polyether made from propylene glycol or glycerol with propylene oxide and ethylene oxide. Compound it with a silicone emulsion and it improves both dispersion and foam inhibition.

PolyetherView specifications
3050 / 4809 Polyether Defoamer: colourless or pale yellow transparent oily liquidPolyether

3050 / 4809 Polyether Defoamer

30504809

A non-toxic polyether that leaves no spots and picks up little moisture. It stays chemically stable in service and can be used as an emulsifier in emulsion polymerisation.

PolyetherView specifications
12701 / 3010 Polyether Defoamer for Fermentation: transparent to pale yellow viscous liquid (polyether type)Polyether

12701 / 3010 Polyether Defoamer for Fermentation

127013010

A polyether built specifically for foam control in biological fermentation. It is non-toxic, leaves no spots, and it does not disturb the culture strains in the fermenter.

PolyetherView specifications
9800 Polyether Defoamer: colourless to pale yellow oily liquidPolyether

9800 Polyether Defoamer

9800

A multifunctional polyether for pulping, dyeing and fermentation. It controls foam without leaving spots, picks up little moisture, stays chemically stable in service and blends into those systems.

PolyetherView specifications

Oilfield-Grade Defoamers

Low-silicone, high-flash-point defoamers for crude extraction, gas-field and offshore platform oil-water separation, refining and delayed coking. Built for high-salinity, high-water-cut and high-temperature wells.

See the full Oilfield range and selection guide

Defoamer Raw Materials

The chemistry itself. Modified silicone polyethers, methyl silicone oil, capped polyether, methyl MQ resin, fumed silica, tributyl phosphate and silicone wetting agents: supplied to defoamer manufacturers since 2012.

See the full Raw Materials range and selection guide

F37 Modified Silicone Polyether: transparent to pale yellow oily liquid, slight alcoholic odourRaw Materials

F37 Modified Silicone Polyether

F37

A base chemistry for defoamer manufacturing: allyl ethers of different HLB values grafted onto low-hydrogen silicone with high-cloud-point polyoxyethylene ether. Water-soluble, low in silicone, high flash point.

Water-soluble liquid (≥95% active)View specifications
F45 / F55G / F623 Silicone Polyether: white to translucent viscous paste, ≥98% solidsRaw Materials

F45 / F55G / F623 Silicone Polyether

F45F55GF623

Unsaturated allyl ethers of different HLB values grafted onto low-hydrogen silicone oil. The base is low-foaming, emulsifies strongly and defoams on its own at high and low temperature.

Silicone polyether (≥98% solids)View specifications
Modified Silicone Polyether: white to translucent viscous paste (modified silicone polyether)Raw Materials

Modified Silicone Polyether

Modified Silicone Polyether

Unsaturated allyl ethers of different HLB values grafted onto low-hydrogen silicone oil. A low-foaming base that emulsifies strongly and defoams on its own across the temperature range.

Silicone polyetherView specifications
201 Methyl Silicone Oil: colourless transparent oily liquidRaw Materials

201 Methyl Silicone Oil

201

A trimethyl-capped linear polysiloxane with a dimethylsilicone backbone. Colourless, non-toxic and low-volatility, it takes heat well, has a high flash point and drops surface tension low.

Linear silicone oilView specifications
Capped Polyether and Polyether Defoamer Base: transparent or pale yellow oily liquidRaw Materials

Capped Polyether and Polyether Defoamer Base

Capped PolyetherPolyether Defoamer Base

Block and random copolymers built from propylene glycol, glycerol or other starters with propylene oxide and ethylene oxide. Non-toxic, efficient, leaves no spotting and picks up little moisture.

PolyetherView specifications
Methyl MQ Silicone Resin: white granules or powderRaw Materials

Methyl MQ Silicone Resin

Methyl MQ Resin

A three-dimensional, non-linear silicone material built on an Si–O backbone, with a molecular weight of 1000–8000. Works from −60 °C to +300 °C.

White granules or powder (≥99% MQ content)View specifications
PR595 Silicone Wetting and Spreading Agent: colourless to light amber transparent oily liquidRaw Materials

PR595 Silicone Wetting and Spreading Agent

PR595

A low-molecular-weight, non-ionic, polyether-modified silicone surfactant. At 0.01% it pulls surface tension down to about 21 dynes/cm, so water-based agrochemicals wet and spread fast on waxy leaves.

Transparent oily liquidView specifications
Fumed Silica and Tributyl Phosphate: white powder (fumed silica) and colourless liquid (tbp)Raw Materials

Fumed Silica and Tributyl Phosphate

Fumed Silica #2V15V200V380

Highly dispersed transparent silica with a large specific surface area and pore volume, plus tributyl phosphate as a defoamer synergist. Supplied as V15, V200 and V380.

Powder and liquidView specifications
Defoamer Raw Material Supply Catalogue: various raw materials — liquids, pastes, powders and granulesRaw Materials

Defoamer Raw Material Supply Catalogue

Defoamer Raw Materials

Since 2012 we have supplied raw materials to defoamer makers starting out or running small batches. The range covers finished defoamers, base chemistries and auxiliary materials.

Various: liquid and solidView specifications

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.