A silicone-free emulsion defoamer built for paper sizing white water and other low-pH systems. Grade 653D is tuned for degassing duty.
A completely silicone-free high-carbon alcohol ether emulsion, aimed at low-pH foaming systems such as paper white water carrying cationic rosin size, modified starch, PVA and AKD sizing agents, and at dye, pigment and ink manufacture. It clears surface foam fast and pulls micro-bubbles off the fibres. Low dose rates, quick foam break, and inhibition that holds.
Each model below represents a different internal structure. Select the model that matches your foaming system. Values are typical and indicative, not a specification.
| Property | 653 | 653D (degassing) |
|---|---|---|
| Appearance | White emulsion | White emulsion |
| Active content | 30.0±1.0 | 30.0±1.0 |
| Viscosity (25 °C, mPa·s) | 300-1800 | 200-1500 |
| pH | 6.0-8.0 | 6.0-8.0 |
| Ionic type | Non-ionic | Non-ionic |
The decision is about what the product must not contain. Where a silicone residue would break adhesion, printing or coating, the silicone-free routes are the only ones that qualify, and within them the dose and the time the grade holds the foam are what you compare.
The published viscosity across this family runs from 200-1500 to 300-1800, which is the practical difference between the models when you are choosing pump and dosing equipment.
Silicone-free grades work by defoaming rather than by wetting, which makes them slower to act and longer to hold. Trial them where the coating, the laminate or the printing surface cannot tolerate a silicone residue at all: run the same stepped dose on two split batches, and check the finished surface for pinholes and adhesion loss, not only for foam. The ten-minute foam height matters more than the one-minute figure with this chemistry.
Supplied as a non-hazardous good. Liquid models are packed in 25, 50 and 200 kg plastic drums or 1000 kg IBC totes; powder models in 20 kg cartons. Shelf life is 12 months in a sealed container, stored indoors and away from direct sunlight. Mix or shake before use; if diluted before use, use the diluted product within the same shift.

Download TDS (PDF) Request MSDS
The technical data sheet restates the typical property table above for purchasing and QA files. A GHS safety data sheet is issued per model on request, because classification follows the exact grade and the destination regulation.
A silicone-free fatty-alcohol-ether emulsion for low-pH foaming systems such as paper white water. It clears s
A silicone-free polyether emulsion defoamer. Non-toxic, no spotting, low hygroscopicity and chemically stable.
A fatty-alcohol-ether emulsion for the many processes that rule silicone out. It breaks foam fast, disperses w
A silicone-free fatty-alcohol-ether emulsion built for engineered stone (artificial marble) production. It cle
The same grades are quoted to converters and formulators in Vietnam, Cambodia and Laos; each market page covers the foam problems we are usually asked about there.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.