Crude production, gas-field separation, offshore platforms, refining and delayed coking all make foam. It cuts throughput, floods separators and can carry product out with the water stream.

Low dose at high salinity and temperature, low silicone content for product safety, and a flash point the operator safety regime will accept.
Co-developed with major domestic oilfields. It self-emulsifies, leaves no oil ring and no floating solids after high-temperature water dilution, and holds without layering on long storage.
View specifications OilfieldA modified silicone polyether for crude production, transport, refining and delayed coking. Low silicone content, a high flash point and a low working dose.
View specifications OilfieldThree grades of water-soluble grafted polyether-siloxane compounds, blended for crude production, transport, refining and delayed coking. Fast knock-down at a low dose.
View specificationsA high-content silicone concentrate. It does the work of a standard defoamer at a fraction of the dose, and it
Silicone & EtherA silicone-polymer emulsion defoamer that holds up in salt, heat and shear. It leaves no oil ring, no sediment
Silicone & EtherAn economical broad-spectrum defoamer for water-based systems, built for room-temperature work. It breaks foam
Silicone & EtherA modified polydimethylsiloxane emulsion at 33% active content. It breaks foam fast and disperses well, and it
Silicone & EtherA broad-spectrum room-temperature emulsion defoamer with strong foam inhibition and good dispersion. It keeps
Silicone & EtherA high-temperature silicone emulsion defoamer rated to 130 °C. It is a drop-in alternative to imported high-te
Silicone & EtherA silicone powder defoamer for dry-mix systems. The active rides on a solid carrier, so it survives high elect
Silicone & EtherA silicone-free powder defoamer built on modified polyoxyethylene ethers. It is formulated for cationic starch
The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.