Agrochemical formulations carry a heavy surfactant load and sit at extreme pH. Foam in the dilution tank and at the nozzle wastes active ingredient, and poor wetting shows up as uneven coverage and run-off.

You want a silicone surfactant that holds up at low pH and improves wetting, spreading and rain-fastness, alongside a defoamer that stays out of the way of the tank mix.
A low-molecular-weight, non-ionic, polyether-modified silicone surfactant. At 0.01% it pulls surface tension down to about 21 dynes/cm, so water-based agrochemicals wet and spread fast on waxy leaves.
View specifications Silicone & EtherA fluorosilicone emulsion defoamer with strong acid and alkali durability and good dispersibility in hard water. It works at low dosage, inhibits foam for long stretches and carries a fine particle size.
View specifications Silicone & EtherA fluorosilicone compound made for water-based cutting fluids and water-based lubricants. Below 0.1% it keeps foam suppressed for up to 100 hours.
View specificationsA base chemistry for defoamer manufacturing: allyl ethers of different HLB values grafted onto low-hydrogen si
Raw MaterialsUnsaturated allyl ethers of different HLB values grafted onto low-hydrogen silicone oil. The base is low-foami
Raw MaterialsUnsaturated allyl ethers of different HLB values grafted onto low-hydrogen silicone oil. A low-foaming base th
Raw MaterialsA trimethyl-capped linear polysiloxane with a dimethylsilicone backbone. Colourless, non-toxic and low-volatil
Raw MaterialsBlock and random copolymers built from propylene glycol, glycerol or other starters with propylene oxide and e
Raw MaterialsA three-dimensional, non-linear silicone material built on an Si–O backbone, with a molecular weight of 1000–8
Raw MaterialsHighly dispersed transparent silica with a large specific surface area and pore volume, plus tributyl phosphat
Raw MaterialsSince 2012 we have supplied raw materials to defoamer makers starting out or running small batches. The range
The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.