Emulsion polymerisation and high-solids adhesive systems trap foam during mixing and reaction. It shows up as viscosity drift and unstable particle size, and in coating applications as surface defects.

It has to work at high solids and high viscosity, give real degassing performance, and not create surface defects or weaken film formation.
The 4416 grade is mineral oil with hydrophobic silica and a dispersant; 2308 is mineral spirits with isoparaffinic oil and a modified polyether. Both resist acid and alkali and help entrained air out of viscous media.
View specifications Mineral Oil / PE EsterThe 202 grade pairs polyether ester with mineral oil and hydrophobic silica; 7501 is the waterborne version, built around a dispersing solvent. Neither one leaves surface defects or interferes with film formation.
View specifications Mineral Oil / PE EsterA waterborne defoamer built from polyether ester, a dispersing solvent and hydrophobic silica. It leaves no surface defects and does not interfere with film formation.
View specifications PolyetherAn end-capped block copolymer of propylene oxide and ethylene oxide built on a propylene glycol starter, molecular weight 2000. Non-toxic, leaves no spots and picks up little moisture.
View specifications Silicone & EtherA propoxylated polyoxyethylene ether base blended with modified fluorosilicone and a hydrophilic silicone polyether. It works in water-based and oil-based systems alike.
View specificationsA mineral-oil defoamer whose actives are a specialty polyether and silica. It breaks foam fast and holds inhib
Mineral Oil / PE EsterA broad-spectrum polyether fatty-acid-ester defoamer that breaks or suppresses foam in aqueous systems. It is
Mineral Oil / PE EsterA mineral-oil defoamer built on mineral oil, vegetable oil, a fatty acid amide and a dispersant. It gives broa
Mineral Oil / PE EsterA high-fatty-acid-ester emulsion defoamer for foaming systems that ordinary silicone defoamers do not handle.
Mineral Oil / PE EsterA waterborne defoamer made by esterifying polyether with a fatty acid. It has broad compatibility, keeps foam
Mineral Oil / PE EsterA waterborne defoamer made by esterifying polyether with a fatty acid, offered in three viscosity grades. It h
Mineral Oil / PE EsterA high-fatty-acid-ester emulsion defoamer for systems where ordinary silicone is the wrong choice. It leaves n
PolyetherA multifunctional polyether for processes that rule out silicone. It handles foam without leaving spots, picks
The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.