Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer Support for Laos’s Mining, Hydropower and Rubber Sector

Laos’s industrial load is dominated by mining, hydropower and rubber. Foam is a different problem in each: in flotation it is a control variable, in water treatment it is an operating limit, and in latex it is a quality defect.

Aeration basin at an industrial water treatment plant

Where foam matters in Lao operations

Mining flotation and slurry circuits

Frothers are added on purpose in flotation, so a defoamer here is not a foam killer but a balance: too much and the froth collapses and recovery falls, too little and the froth overflows the cells and floods the launder. Thickener overflow and tailings lines foam for a different reason — residual reagents and fine solids.

Applications

Foam problems we are asked about in Laos

Inside the plant

Where the drums for Laos are actually filled

Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.

Silicone emulsion line at the Tianjin defoamer plant
Emulsion grades are made at our own plant, which is why the dilution and dosing notes on this page match what the plant actually fills.
Laboratory bench used for foam and compatibility tests
Foam height, persistence and compatibility are checked on the bench before a grade is recommended for a Lao process.
200 kg steel drums of defoamer staged for dispatch
Liquid grades travel in 200 kg drums or 1000 kg IBC totes; the packing that applies to a grade is stated on its product page.
Starting point

Grades we usually start with in Laos

ModelChemistryTypical useProperty data
30801High-content silicone-polyether emulsionThickener overflow, tailings and general plant foamData
2030L / 121LSilicone-free polyetherAeration basins, clarifiers and water loopsData
2030 / 2080PolyetherHigh-temperature and alkaline water systemsData
530-4Mineral oilSlurries, fillers and plant-wide foam controlData
663 / 65340Silicone-free fatty alcohol etherLatex, rubber and silicone-sensitive systemsData

Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.

Dosing

How to trial a grade in a Laos plant

Support

How we work with Lao buyers

Regional technical support, in English

We have provided technical support to industrial buyers in Southeast Asia, Laos included. Reviews are done in English over email or WhatsApp: what the foam looks like, where it forms, what the water chemistry is, what has already been tried.

A plant in Tianjin, not a trading desk

Every grade is produced at our own plant, in production since 2009, and each model carries a published property table so a metallurgist or plant chemist can compare active content, viscosity and ionic type before requesting anything.

Samples and a test plan

Samples are small and meant for a trial inside your own circuit. Tell us the system and we will name the grades worth testing, plus the checks that decide between them — froth depth, recovery, COD, or cure.

FAQ

Laos: questions we get asked

Does a defoamer interfere with flotation frothers?
It can, and that is the point to manage. Defoamers and frothers act on the same interface, so the grade and the dose are chosen to control overflow without collapsing the froth the circuit depends on. Trial on site, in increments.
Which grade for an aeration basin with high organic load?
Start from the silicone-free polyether range. It disperses into water systems without the carry-over problems silicone can cause downstream, and the dose can be trimmed as the load changes seasonally.
Can you support a plant that has never used a defoamer before?
Yes. In that case the first step is usually a foam audit rather than a product recommendation: where the foam forms, what stabilises it, and what the plant already adds that creates it.
Can ElonMek quote FOB or CIF terms for Laos?
FOB and CIF are the two terms normally discussed, and a quote is prepared per inquiry against the grade and packing actually chosen. This page is an introduction to the grades and to the support behind them, not an offer: there is no price list here and no quotation until the system and the packing are known.
Which export documents come with a shipment?
The commercial invoice, packing list and bill of lading travel with every consignment, together with the safety data sheet for the specific grade. The HS code is confirmed for that grade at the time of the order, because classification follows the chemistry of the grade rather than the product family.
What packing can be specified?
Liquid grades are supplied in 200 kg drums or 1000 kg IBC totes; paste and powder grades travel in pails or cartons. The packing that applies to a given grade is printed on its product page, and the shipping marks can carry the consignee details required at destination.

Other Southeast Asian markets

Next step

Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.

Describe your foam system WhatsApp

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.