Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer Support for Cambodia’s Garment, Rubber and Beverage Plants

Cambodia’s manufacturing base is concentrated: garment washing and dyeing, rubber processing, beverage filling, and a fast-growing construction supply chain. Each of those four has its own foam problem, and each is usually solved with a different chemistry.

Liquid product being mixed in a process vessel

Four foam problems that repeat across Cambodian plants

Garment washing, dyeing and finishing

Washing and garment-dye houses run heavy surfactant loads at relatively low liquor ratios. Foam in the drum lifts the goods out of the bath, so the shade drifts from batch to batch and the operator compensates with more chemical instead of less air.

Applications

Foam problems we are asked about in Cambodia

Inside the plant

Where the drums for Cambodia are actually filled

Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.

Compounding hall at the Tianjin defoamer plant
Silicone, silicone-free and mineral-oil lines run side by side, so a grade can be matched to the chemistry a Cambodian plant already uses.
Operator monitoring a defoamer reaction vessel
Reaction and dispersion run on our own lines, and the same team answers the technical questions that come back from a trial.
1000 kg IBC tote of defoamer ready for dispatch
For larger volumes a liquid grade can travel in a 1000 kg IBC tote instead of drums.
Starting point

Grades we usually start with in Cambodia

ModelChemistryTypical useProperty data
218B / 218PFSilicone polymer emulsionGarment wash baths, general process foamData
663 / 65340Silicone-free fatty alcohol etherLatex and systems sensitive to siliconeData
1308 / 1309Mineral oilFillers, slurries and plant-wide foam controlData
9800PolyetherFermentation, syrup and food-adjacent process tanksData
403LSilicone-free, engineered stoneSlurry mixing for engineered stone and tileData

Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.

Dosing

How to trial a grade in a Cambodia plant

Support

How we work with Cambodian buyers

Support already given in the region

We have provided technical support to converters and formulators across Southeast Asia, Cambodia included — foam-system reviews, grade recommendations, and trial read-outs handled in English by email or WhatsApp.

Documentation before the first drum

Each grade has a published property table on this site, and technical and safety documentation is issued in English. Buyers can qualify a grade before any commercial discussion starts.

A trial sized to the decision

Samples are issued so a plant can run its own comparison at process temperature. Send the system details and we will reply with the two or three grades worth testing and the way to read the result.

FAQ

Cambodia: questions we get asked

Is a silicone-free grade necessary for latex?
Usually yes. Silicone residues can disturb cure and appearance, so the silicone-free fatty alcohol ether and polyether ranges are the normal starting point for latex and for goods that will be coated or printed afterwards.
Can one defoamer cover washing and dyeing?
Often one grade covers both, but not always: washing runs higher surfactant load and lower temperature than dyeing. Testing both baths separately is the reliable way to decide whether one drum or two is the right answer.
Do you supply to Cambodia directly?
Cambodian buyers work with us directly in English. We discuss the application first, then the commercial route, so the grade is settled before logistics are.
Can ElonMek quote FOB or CIF terms for Cambodia?
FOB and CIF are the two terms normally discussed, and a quote is prepared per inquiry against the grade and packing actually chosen. This page is an introduction to the grades and to the support behind them, not an offer: there is no price list here and no quotation until the system and the packing are known.
Which export documents come with a shipment?
The commercial invoice, packing list and bill of lading travel with every consignment, together with the safety data sheet for the specific grade. The HS code is confirmed for that grade at the time of the order, because classification follows the chemistry of the grade rather than the product family.
What packing can be specified?
Liquid grades are supplied in 200 kg drums or 1000 kg IBC totes; paste and powder grades travel in pails or cartons. The packing that applies to a given grade is printed on its product page, and the shipping marks can carry the consignee details required at destination.

Other Southeast Asian markets

Next step

Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.

Describe your foam system WhatsApp

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.