China defoamer and antifoam manufacturer
We were founded in 2009 and have specialised in defoamer research, production and supply from the beginning. Everything we sell is compounded, emulsified and filled in our own plant in Tianjin, Hebei District.
That has a practical consequence for you: the property values in this catalogue are the values from the batch that reaches you, not figures copied from a supplier brochure. We publish the full table for every model, active content, viscosity, pH, ionic type, density, flash point, including the figures that are not flattering.
We also sell the base chemistry itself. Since 2012 we have supplied unsaturated polyethers, capped polyethers, low-hydrogen silicone oils, methyl MQ resin, fumed silica and modified silicone polyethers to defoamer manufacturers that were starting out or running small batches.
We ask you to confirm suitability in your own laboratory or on your own equipment. Foam systems vary enormously, no supplier can replace your trial, and any manufacturer who says otherwise is selling you something.

The ten application areas our grades are specified into, each with the models customers usually start from.
Shake-down trials, active-content titration, viscosity and pH checks. the routine behind the property tables we publish.







We compound, emulsify and fill in our own Tianjin plant, so the technical data you receive is the data from the batch you receive. No broker margin, no substituted raw material, no surprises on the next delivery.

Silicone and ether, silicone-free, mineral oil and polyether ester, polyether, oilfield, plus the raw materials themselves. Most foam problems can be solved from one supplier.

Appearance, active content, viscosity, pH, ionic type, density and flash point published for every product, not just the headline figure. Typical properties are indicative and we say so; specification sheets are available on request.

Send us your foaming system, the base chemistry, temperature, shear and dosage you already use, and our technical team will run a shake-down test and recommend a model and dosage, normally within 24 hours.

As a manufacturer we can work at quantities a trading company would not, including OEM dilution under your own label if you prefer to cut the concentrate yourself.

Documentation, packing to your specification, and shipment worldwide. We work with customers in more than 30 countries.

Base chemistry, operating temperature, shear level, current defoamer and dosage, and the outcome you need.

Our technical team reproduces the conditions and screens the candidate models from the six types.

You get a recommended category, a recommended model and a starting dose, normally within 24 hours on working days.

Safety data sheet, technical data, packing to your specification and export paperwork, then production.
Standard packing for liquid grades.
Available for bulk liquid orders.
Standard packing for powder grades.
| Company | Tianjin Yining Meike Fine Chemical Co., Ltd. |
|---|---|
| Founded | 2009: focused on defoamer R&D, production and supply since the start |
| Location | No.197 Yuguan Road, Hebei District, Tianjin, China |
| Product range | 6 defoamer types, 64 product categories, 114 models |
| Raw materials | Base chemistry supplied to defoamer manufacturers since 2012 |
| Markets | Coatings, adhesives, papermaking, textile, metalworking, fermentation, water treatment, concrete additives, oil & gas, agrochemical |
| Working hours | Monday to Friday, 09:00–18:00 (GMT+8) |
| Languages | English, Chinese |
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.