Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Textile Printing & Dyeing Defoamers

Jet dyeing, padding and high-temperature polyester cycles load the bath with surfactant and then run it hot, up to 130 °C, under shear. Most defoamers give up somewhere in that combination.

Textile dyeing machines with rolls of dyed fabric

What the defoamer has to do here

It has to survive the heat and the shear, disperse the moment it hits the bath, and leave the clarity and the handle of the fabric alone.

Recommended

Models Usually Specified for Textile Printing & Dyeing

Also consider

Other Models in the Same Chemistry

Before you specify

Textile Printing & Dyeing: questions we get asked

My shades go uneven when foam appears. Is the defoamer the cause or the fix?
Usually the fix, if it is chosen properly. Foam in the dye bath lifts fabric out of the liquor and produces exactly that uneven take-up. What causes trouble is the wrong defoamer: one that breaks the dye dispersion or leaves a residue blocking dye sites.
Will the defoamer change the handle of the fabric?
It should not. The grades we list for dyeing are chosen to disperse cleanly in the bath and rinse out, with no softener or oil that would alter the handle. Confirm it on your own fabric before a bulk order.
Which model suits high-temperature jet dyeing?
ND120F / 120Z is the usual first trial at the top of the dyeing temperature range, where most defoamers separate. Give us the dye class, liquor ratio and machine type and we will confirm the grade.
Markets

Buying from Southeast Asia?

The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.