Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer for Vietnamese Wastewater and Effluent Plants

A Vietnamese industrial park usually shares one effluent plant between food, textile and metalworking tenants. Protein, oil and surfactant arrive together, the aeration basin foams, and the plant overflows or cuts aeration before it is hydraulically overloaded.

Aeration basin at a wastewater treatment plant

Foam in the effluent train

Aeration basins and activated sludge

Surfactant and protein stabilise the foam on the surface, and the blanket lifts with the air. Overflow follows, and oxygen transfer drops before anyone notices the load.

Applications

Foam problems we are asked about in Vietnam

Inside the plant

Where the drums for Vietnam are actually filled

Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.

Storage tanks at the Tianjin plant
Liquid grades are held and blended on site, so a repeat order is made to the same route rather than sourced in.
Reaction vessel charged with base chemistry
The same team that answers a trial question owns the reaction, which shortens the loop between a result and a decision.
IBC tote of a liquid grade on the loading dock
Effluent plants usually take IBC totes rather than drums; the packing per model is on its product page.
Starting point

Grades whose published applications cover wastewater and effluent

ModelChemistryTypical useProperty data
118G / 208GSilicone & EtherWastewater treatment, Industrial cooling waterData
218B / 218PFSilicone & EtherLandfill leachate, Microbiological water treatmentData
3020 / 3020ASilicone & EtherWastewater treatment, Landfill leachateData
663-10 / 663-20Silicone & EtherLandfill leachate, Wastewater treatmentData

Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.

Dosing

How to trial a grade in a Vietnam plant

Support

How we work with Vietnamese buyers

Technical support already delivered in the region

Our team has provided technical support to converters and formulators in Vietnam, Cambodia and Laos: reviewing the foam system, naming the grades worth testing and reading the trial results together. Everything runs in English, by email or WhatsApp.

One plant, published property data

Every grade is made at our own plant in Tianjin, in production since 2009, and each model carries its own property table on this site. A formulator can compare active content, viscosity, pH and ionic type before asking for a sample.

Samples sized for a decision

Tell us the system and the problem, and we will say which models to compare and how to run the comparison. Sample quantities are small on purpose: the aim is a decision on one grade, not stock on a shelf.

FAQ

Vietnam: questions we get asked

Will a defoamer upset the biomass?
That is a real risk and the reason a wastewater trial is run on an actual sludge sample. Compare COD and the respiration of the sludge alongside foam height; a grade that defoams but loads the basin is the wrong answer.
Silicone or silicone-free in an aeration basin?
Silicone grades act faster at a lower dose; silicone-free grades are chosen where the water goes on to a reuse step or where a silicone residue is unwanted downstream. The trial decides.
Can you dose for a fluctuating effluent load?
The grade is only half the answer; the dosing position and the control strategy are the other half. We will say where in the train the dose belongs for the foam you describe.
Can ElonMek quote FOB or CIF terms for Vietnam?
FOB and CIF are the two terms normally discussed, and a quote is prepared per inquiry against the grade and packing actually chosen. This page is an introduction to the grades and to the support behind them, not an offer: there is no price list here and no quotation until the system and the packing are known.
Which export documents come with a shipment?
The commercial invoice, packing list and bill of lading travel with every consignment, together with the safety data sheet for the specific grade. The HS code is confirmed for that grade at the time of the order, because classification follows the chemistry of the grade rather than the product family.
What packing can be specified?
Liquid grades are supplied in 200 kg drums or 1000 kg IBC totes; paste and powder grades travel in pails or cartons. The packing that applies to a given grade is printed on its product page, and the shipping marks can carry the consignee details required at destination.

Other Southeast Asian markets

Next step

Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.

Describe your foam system WhatsApp

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.