A dyehouse in Vietnam usually runs hot, salty and alkaline at the same time. Scouring and levelling surfactants hold air in the liquor, the liquor foams against the fabric, and the batch comes out mottled while the pump cavitates. The grade that fixes it depends on whether the bath is running silicone-compatible or silicone-free.

High liquor velocity plus a heavy surfactant load: foam lifts the rope and the package, so shade varies along the batch and rope marks are set in before the fixation step.
Alkaline scour liquors foam hard in the first rinse, and the foam carries fabric into the overflow. Silicone-free grades are usually the starting point where the goods cannot tolerate a silicone residue.
Printing pastes and finishing paddings air-entrain under high shear. Foam here shows as pinholes and uneven coverage rather than as overflow, so the trial has to read the print, not the tank.
Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.



| Model | Chemistry | Typical use | Property data |
|---|---|---|---|
| 12701 / 3010 | Polyether | Chemical fibre, Dyeing and printing | Data |
| 201 | Polyether | Chemical fibre, Dyeing and printing | Data |
| 2030 / 2080 | Polyether | Chemical fibre, Dyeing and printing | Data |
| 2030L / 121L | Silicone-Free Emulsion | Chemical fibre, Dyeing and printing | Data |
Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.
Our team has provided technical support to converters and formulators in Vietnam, Cambodia and Laos: reviewing the foam system, naming the grades worth testing and reading the trial results together. Everything runs in English, by email or WhatsApp.
Every grade is made at our own plant in Tianjin, in production since 2009, and each model carries its own property table on this site. A formulator can compare active content, viscosity, pH and ionic type before asking for a sample.
Tell us the system and the problem, and we will say which models to compare and how to run the comparison. Sample quantities are small on purpose: the aim is a decision on one grade, not stock on a shelf.
Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.