Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer Selection for Wastewater and FGD Systems

Landfill leachate and flue-gas desulphurisation foam behave differently from general industrial foam. What to specify when membranes are in the path, and why culture safety matters in biological systems.

By the ElonMek technical team · Application Guide · Published 2026-06-14

Aeration basin churning at a municipal wastewater treatment plant

Leachate foam is a different problem

Landfill leachate foam is generated by volatile fatty acids and surfactants at low pH, and it is remarkably stable. General-purpose cationic-stable silicone emulsions often lose activity here within days. Our PT24 grade was developed specifically for leachate: no oil ring, no membrane blockage, and good water solubility so it disperses instead of filming.

FGD foam can stop an absorber

In flue-gas desulphurisation, foam loading into the demister reduces efficiency and can force a plant shutdown. The chemistry requirement is different from ordinary foam control: the defoamer must not interfere with the gypsum crystallisation that carries the sulphur out of the system. Polyether grades such as 2030 and 2080 are the default choice precisely because they are non-ionic and leave no film.

When membranes are downstream

Any defoamer used before UF or NF must be evaluated for membrane compatibility. Silicone defoamers are the primary cause of membrane blocking in defoamer-using plants. Our PT24 and the fatty-acid-ester grades are selected for these duties.

Biological systems need culture-safe chemistry

In biological wastewater treatment the defoamer is dosed into a live biological reactor. Silicone is persistent and can bioaccumulate. Polyether chemistry is non-ionic, non-toxic and readily biodegrades, which is why we specify polyether grades for these applications.

Keep reading

Related guides

All technical guides

Range

Grades used in this application

All 64 grades

Markets

Buying from Southeast Asia?

The same grade families are supplied to textile, paper and construction plants in Vietnam, Cambodia and Laos.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.